Surface technology of stainless steel products
Apr 25, 2021
Smooth surface is an important feature of stainless steel products and is of great significance for maintaining the normal function of stainless steel products. Therefore, the polishing process of stainless steel products is very important. According to the manufacturing steps, the polishing process of stainless steel products can be divided into two steps: polishing and light emitting.
Polished
The main goal of polishing stainless steel welded parts is to remove the solder joints and reach a workpiece with a surface roughness of R10um in preparation for light emission.
The polishing part can be summarized as follows:
Three processes: rough grinding, semi-finishing grinding, fine grinding
Three sides: two sides and one edge
Nine polishing machines
Twenty-seven adjustment agencies.
The detailed description is as follows:
1. Perform visual inspection on the workpiece transferred to the polishing process from the previous stage, such as whether the weld has missing welds, welded through, uneven depth of the weld, too far from the seam, partially sunken, uneven butt, and whether there is a deep scratch Marks, bruises, serious deformations and other defects that cannot be remedied in this process should be returned to the previous process for repair if there are any such defects. If there are no such defects, enter the polishing process.
2. For rough grinding, use a 600# abrasive belt to grind the workpiece back and forth on three sides. The goal of this process is to remove the solder joints left by the workpiece welding and the bruises that occurred in the previous process to achieve the fillet of the weld. After preliminary forming, the horizontal and vertical planes basically have no big scratches or bumps. After this step, the surface roughness of the workpiece should be able to reach R0.8mm. Pay attention to the inclination angle of the belt machine and control the pressure of the belt machine on the workpiece during the polishing process. Generally speaking, it is more moderate to be in a straight line with the tossed surface!
3. Semi-finish grinding, use 800# abrasive belt to grind the three sides of the workpiece according to the previous method of grinding the workpiece back and forth, mainly to correct the joints in the previous process and to further finely grind the impressions produced after rough grinding , The marks left by the previous process should be repeatedly ground to achieve no scratches on the surface of the workpiece and basically brighten. The surface roughness of this process should reach R0.4mm. (Be careful not to produce new scratches and bruises in this process, because such defects cannot be repaired in the subsequent process.)
4. For fine grinding, the 1000# abrasive belt is mainly used to correct and grind the small lines that appeared in the previous process. The grinding method is the same as the above. The goal to be achieved in this process is that the seam between the ground part and the unground part of the workpiece is basically disappeared, and the surface of the workpiece is further brightened. The workpiece after grinding through this process should be basically close to the mirror effect, and the surface roughness of the workpiece should be able to reach R0. 1mm
5. Instructions for replacing the abrasive belt: Generally speaking, 600# abrasive belt can polish 6-8 pieces of 1500mm long workpiece, 800# abrasive belt can polish 4-6 pieces of workpiece, and 1000# abrasive belt can Polishing 1-2 pieces of the workpiece, the specific situation also needs to be based on the welding spot of the workpiece, the pressure used for polishing, and the method of polishing have a great relationship. In addition, it should be noted that the replacement of the abrasive belt must ensure that the abrasive belt can rotate smoothly on the sponge wheel in order to achieve the purpose of uniform grinding of the workpiece.
sold out
The main purpose of the light emitting part is to mirror the polished stainless steel in the front to achieve the purpose of mirror surface. In summary, this process includes:
Two processes: waxing, polishing
Two motors, two wool wheels, big green wax, cloth
The specific content is as follows:
1. Visually inspect the welding parts that have entered this process from the previous process, and check to confirm whether there is any omission to be polished to 1000#, all the solder joints are not fully polished, there are rough polish marks, the protective film is seriously damaged, and the grinding is excessive, the fillet is too large, The two ends are severely ground, unevenly ground and some areas are of different depths. Various problems that cannot be repaired in the light-emitting stage, such as various polishing stages, need to return to re-grind or repair. (In this process, it is impossible to repair the bumps, knocks, and large scratches that appear in the polishing, but it can repair very small fine lines, such as the relatively small fine lines polished by 1000#. But it is very troublesome)
2. Mirror
Use a high-speed motor-driven wool wheel (available on the market), with Daqing wax imitating the previous polishing method for mirror polishing. The main purpose of this process is to mirror polishing the workpiece after polishing in the previous steps. Not further grinding. Be careful not to rub the polishing wax onto the covering film on the surface of the workpiece during the operation of this step.
3. Polish
This process is the last process of mirror polishing. A clean cotton cloth wheel is used to rub the surface of the workpiece after the mirror surface, and the workpiece after all the previous processes are wiped clean and polished. The goal of this process is that the surface of the workpiece cannot be distinguished from welding traces, and the waxed and polished workpiece is polished to achieve a mirror reflection height of 8k, and the polished part of the workpiece is almost indistinguishable from the unpolished part. Achieve a complete mirror effect.







